Genesis G4S Series strobes are UL 1971-listed for use indoors as wall-mounted public-mode notification appliances for the hearing impaired. Prevailing codes require strobes to be used where ambient noise conditions exceed 105 dBA (87 dBA in Canada), where occupants use hearing protection, and in areas of public accommodation as defined in the Americans with Disabilities Act. Synchronization is important in order to avoid triggering seizures in people with photosensitive epilepsy. All Genesis strobes exceed UL synchronization requirements (within 10 milliseconds over a two-hour period) when used with a synchronization source. S
Addressable G4AVRF + GRSW
• High Fidelity performance with excellent STI – Increased sound fidelity and audio intelligibility with an STI rating of .81 (More than .76 is excellent) • Low Frequency (520Hz) capable – Low frequency output meets NFPA standards for newly constructed commercial sleeping areas • High Performance LED Strobe Technology – Ultra low device current consumption allows: – More devices per circuit – Ability to use lower gauge wire – Longer wire runs – Fewer booster power supplies – High efficiency optics – Selectable 15, 30, 75, or 110 cd light output – LED devices may be mixed with legacy Xenon strobes on the same circuit and in the same field of view • Field flexibility – Speakers are also capable of both 25V and 70V and voltage in a single model with a field selectable switch – Speakers feature selectable wattage taps for ¼W, ½W, 1W, and 2W to configure sound output levels in the field • Low-profile Design – Ultra-slim... protrudes about 1.5" from the mounting surface – Attractive appearance... no visible mounting screws • Multiple “FIRE” Marking Options – Order English, French, Spanish or no FIRE markings – Change markings at any time with replaceable quick-swap covers • Easy to Install – Pre-install and pre-wire with convenient universal room side wiring plate – Check electrical continuity on room side wiring plate with included diagnostics check bar – Diagnostics port streamlines device circuit testing – Fits 2-gang and 4-inch square electrical boxes – Optional red and white trim plates available – Slide switches for field configuration – 12 to 18 AWG in-out screw terminals for quick wiring • Current draw is the same for all candela output settings – Easier for new system design – Flexible for future changes in light output needs
